Sharp UP-600 instruction manual That were picked up last time, select 2 Last Picking

		Available report type
Report title	Description	in each mode		Data to be entered
		X1/Z1	X2/Z2
27 DAILY NET	Daily net		X2, Z2
28 GLU	GLU	X1, Z1		Start/end GLU code
29 GLU BY CLERK	GLU by clerk	X1, Z1
30 BALANCE	Balance	X1	X2
31 BILL	Bill report	X1, Z1
32 CUSTOM	Customer sales 1		X2, Z2	Only details (date and time)
SALES1				Start/end customer codes
33 CUSTOM	Customer sales 2		X2, Z2	Detail/amount & total
SALES2				Start/end customer codes
34 CUSTOM BY	Customer by designated		X2	Amount
AMT	sales range
35 CHARGE	Customer charge account		X2
ACCOUNT
36 STACKED	Stacked report 1	X1, Z1	X2, Z2
REPORT
	Stacked report 2	X1, Z1	X2, Z2

NOTE	*1: You can pick up PLU/EAN codes for issuing the report. You can pick up new PLU/EAN
	codes or the codes that were picked up the last time. To pick up new codes, select “1 NEW
	PICKING”, and follow the procedure show below to pick up new codes. To pick up the codes
	that were picked up last time, select “2 LAST PICKING”.
	Follow the following procedure for picking up PLU/EAN codes.
	To pick up another code

	PLU/EAN code	x	c
	(PLU code: max. 5digits)
(EAN code: max. 13digits)

Ä

Scanning EAN code

x c c

To pick up PLU/EAN codes

that were picked up the last time

To pick up all PLU/EAN codes

*The following reports relating to PLU/EAN is issued in the sequence of PLUs and EANs.

PLU, PLU BY DEPT, PLU IND. GROUP, PLU ZERO SALES, PLU STOCK, PLU MIN. STOCK and PLU CATEGORY

Also the EAN codes are printed in the sequence shown below.

EAN-13

EAN-8

UPC-A

UPC-E

81