164
Tax Programming
Use the following procedure to select any option included in the tax group:
1. From the SETTING menu, select “14 TAX.”
• The TAX menu will appear.
2. Select any option from the following options list:
1 TAX1: Tax 1 2 TAX2: Tax 2
3 TAX3: Tax 3 4 TAX4: Tax 4
5 TAX5: Tax 5 6 TAX6: Tax 6
If the Dkey is pressed on the tax number selection menu, the tax rate in
the cursor position will be deleted.
3. Program each item as follows:
• RATE SIGN (Use the selective entry)
–: Minus rate
+: Plus rate
• TAX RATE (Use the numeric entry)
Tax rate (max. 7 digits: 0.0000 to 999.9999%)
• LOWER TAX LIMIT (Use the numeric entry)
Lowest taxable amount (max. 5 digits: 0.01 to 999.99)
• This option is not available in the VAT system.
NOTE
Procedure
▼
▼
▼
The following illustration shows those options included in the customer programming group.
15 CUSTOMER 1 CUSTOMER ➡See “Customer code” on page 165.
2 CUSTOMER PROG. ➡See “Customer programming” on page 165.
Customer Programming
Use the following procedure to select any option included in the customer programming group:
1. In the SETTING window, select “15 CUSTOMER”.
2. Select an option form the following option list:
1 CUSTOMER: Customer code
2 CUSTOMER PROG.: Customer programming
Procedure