Sharp UX-340L operation manual Registering by fax

Setting Up and Using OpenLCR

fax that it must receive new rate data, and old, incorrect data will continue to be used.

♦Please note that the agreement you enter into by registering is between you and OpenLCR; it is not between you and any carriers.

Registering by fax

To register by fax, fill in the Fax Transmission Test and OpenLCR Line Activation Form, and then fax the form as follows:

1 Place the form with the side you wrote on face down, and push it gently into the document feeder of the fax machine.

The display will show:

READY TO SEND

2 Press the OpenLCR key, the 5 key, and then the START/MEMORY key.

• Your fax automatically calls	OpenLCR	5
OpenLCR and sends the form. After		START/MEMORY
the form is sent, your fax will
automatically receive the rate data.
This lasts one or two minutes. When
downloading is completed, the display
will briefly show DOWNLOAD OK!!
and then revert to the date and time.
Your fax will print out the registration
form to confirm that it was received.

•OpenLCR will also program the date and time and your fax number in your fax machine.

36