Sharp UX-355L operation manual General problems, Film and Loading Printing Paper in Chapter

Problems and Solutions

General problems

Problem	Solution
Information cannot be	• Make sure the fax is plugged in and the imaging
programmed in the fax.	film and paper have been loaded. (Programming is
	not possible if the imaging film and printing paper
	have not been loaded.) See Loading the Imaging
	Film and Loading Printing Paper in Chapter 1.
Nothing appears in the	• Make sure the power cord is properly plugged into
display.	a power outlet.
	• Connect another electrical appliance to the outlet to
	see if it has power.
The machine does not	• If a beep sound is not made when you press the
respond when you press	keys, unplug the power cord and then plug it in
any of its keys.	again several seconds later.
Automatic document	• Check the size and weight of the document (see
feeding does not work for	Transmittable Documents on page 50).
transmission or copying.
Voice calls taken on an	• The fax may interrupt during a voice call if the
extension phone are	reception mode is set to A.M. To prevent
interrupted by the fax.	interruption on a tone dial extension phone, press
	any three keys on the extension phone after
	answering. (Note: Do not enter the code to activate
	fax reception.)
No reception occurs when	• Make sure you have not run out of paper.
polling is attempted.
	• Make sure the transmitting machine is set to
	answer automatically.
	• If the transmitting machine has polling security,
	make sure that your fax number has been entered
	both in your machine and in the transmitting
	machine.

134