10 Press m or l to select “30” (minute), then press the center of the Operation button.
SE T T I NG | JUN. 2 . 2 0 0 4 |
| 1 0 : 3 0 : 0 0 AM |
•The internal clock now starts operating with the seconds display.
11 Press the DISPLAY button to turn off the menu screen.
Note:
•If the date and time have been set, the SETTING 1 screen (T) appears in step 4. Select “SETTING” in the OTHERS 2 screen (~) using the Operation button.
Using the Lens Cap
Attach the strap of the lens cap to the hand strap as shown below.
When attaching or removing the lens cap, grasp the indents on both sides of the cap.
Preparation
Changing to the 24-hour Time Mode
1 After performing step 10 above, press
lor m to select “12H/24H”, then press the center of the Operation button.
O T H E RS | 2 |
|
T I ME | C O D E |
|
T C O U T | 1 2 H | |
1 2 H / 2 4 H | ||
S E T T I N G | 2 4 H | |
R E T U R N |
| |
Indents
When recording, remove the lens cap and attach the lens cap cord to the fastener so that the cap will not get in the way.
2 Press l or m to select “24H”, then press the center of the Operation button.
1 2 H 2 4 H | 2 4 H |
|
3 Press the DISPLAY button to turn off |
| |
the menu screen. |
|
|
Notes: |
|
|
• The date and time, once set, are internally | Fastener | |
recorded even when not displayed on the | ||
screen. |
|
|
•The menu screen automatically turns off if no
settings are made within 5 minutes. | Note: |
| • Always attach the lens cap over the lens |
| when not using the camcorder. |
13
