Sharp VL-Z1U warranty Auto Focus Macro Shots, Basic Operations Camera Recording

Basic Operations

Camera Recording

Auto Focus Macro Shots

Basic Operations

The camcorder is preset to Auto Focus mode, which is designed to focus on most types of subjects. In Auto Focus mode, the camcorder automatically focuses on the subject in the center of the scene. Always keep the subject in the center of the scene.

Notes:

•If no subject is in the center of the scene, the focus area will expand and the subject nearest the center will be focused on.

•Auto Focus may not work in the situations described on page 47. In these situations, use the manual focus function.

•The camcorder may not be able to focus correctly if the subject is closer than approximately 5 feet (1.5 m). Set the zoom control to wide angle, and try refocusing again.

•If the lens is dirty or fogged, the camcorder may not be able to focus correctly.

This camcorder lets you shoot close-up images of small objects such as flowers and insects, or make title frames for your videos. When you want to record a magnified image of a subject which is within approximately 5 feet (1.5 m) of the camcorder, do not zoom in on it. Instead, zoom out all the way by pushing the Power Zoom control to the W side, and then move the camcorder closer to the subject until you obtain the desired angle of view. The camcorder will automati- cally focus on the subject when the lens is set for the widest angle.

Power Zoom control

Note:

•When you are recording a macro shot, be sure that the subject receives sufficient illumination.

22