Appendix

General

Symptom

Possible cause

Suggested solution

POWER/CHARGE

AC adapter or battery pack may

Call for service (p. 73).

(RED) indicator

have malfunctioned.

 

flashes in red when

 

 

charging battery

 

 

pack.

 

 

Cannot edit to con-

Audio/video/S-video cable is not

Connect audio/video/S-video cable

nected VCR.

properly connected.

properly (p. 55).

 

 

 

“E007” is displayed

The camcorder may be damaged.

Do not take out a cassette, and call

on the screen, and

 

for service (p. 73).

unable to operate

 

 

normally.

 

 

 

 

 

Notes:

This unit is equipped with a microprocessor. Its performance could be adversely affected by external electrical noise or interference. If this should happen, turn off the power and disconnect the unit from any power sources, including the lithium battery, etc. Then reconnect the power sources to resume operation.

If the characters displayed in the viewfinder or on the LCD monitor screen appear to malfunc- tion, disconnect the power source and remove the lithium battery, then reconnect the power source, insert the lithium battery, and turn the power on again. The characters on the monitor should be normal. Set the date and time, then resume operation.

Appendix

72

Page 86
Image 86
Sharp VL-Z1U warranty General Symptom Possible cause Suggested solution