Appendix
General
Symptom | Possible cause | Suggested solution |
“E007” is displayed | The camcorder may be damaged. | Do not take out a cassette, and call |
on the screen, and |
| for service. |
unable to operate |
|
|
normally. |
|
|
Notes:
•This unit is equipped with a microprocessor. Its performance could be adversely affected by external electrical noise or interference. If this should happen, turn off the power and disconnect the unit from any power sources, including the lithium battery, etc. Then reconnect the power sources to resume operation.
•If the characters displayed in the viewfinder or on the LCD monitor screen appear to malfunc- tion, disconnect the power source and remove the lithium battery, then reconnect the power source, insert the lithium battery, and turn the power on again. The characters on the monitor should be normal. Set the date and time, then resume operation.
Appendix
78
