Sharp VL-Z300E operation manual To Record from an External Source

To Record from an External Source

1 In Playback mode, press the MENU button to display the menu screen.

2 Press l or m on the Operation button to select Z, then press the centre of the Operation button.

3 Press l or m to select “S-VIDEO IN”, then press the centre of the Operation button.

O T H E R S 1

D E F A U L T

R EMO T E

B E E P

S - V I D E O I N O F F

R E T U RN ON

Notes:

•To pause recording, press m. Press m again to resume recording.

•To operate by remote control (not supplied), perform steps 1 to 6 above, and press the TAPE REC START/STOP button, then press the PLAY/STILL button (g).

•If a digital video recording with a copyright protection signal is used as the playback source, “COPYRIGHT PROTECTED.” appears on the camcorder monitor and the recording function is disabled.

4 Press l or m to select “ON” (for S- video connection) or “OFF” (for video connection), then press the centre of the Operation button.

5 Press the MENU button to turn off the menu screen.

•“S-VIDEO” appears on the screen during a pause or Recording Standby mode when you set the S- VIDEO IN menu item to “ON” in step 4 above.

6 Begin playback on the source equipment connected to the camcorder.

•Check the camcorder screen to see if the picture is properly received.

7 Press the Record Start/Stop button on the camcorder, then press m to begin recording.

Advanced Features

63