Demonstration Mode
You can watch a brief demonstration of the special VIEWCAM features in Demo mode. If the demonstration appears on the screen when you turn on the VIEWCAM for the first time, cancel the Demo mode to use your
VIEWCAM.
Power switch
MENU button
Operation buttons
Watching the Demonstration
1 Make sure that there is no video cassette in the VIEWCAM.
•If a cassette is in the VIEWCAM, Demo mode does not work. Perform the procedure on page 11 to remove it.
2 Hold down the Lock | Lock button |
button and slide the |
|
Power switch to |
|
CAMERA. |
|
Cancelling Demo Mode
1 During the demonstration, perform step
3 above.
2 Press or button (Q) to select “DEMO MODE”, then press the SET button (B) (W) to select “OFF”.
|
|
|
|
|
|
| MENU | 2 |
|
|
| S E T |
|
|
| F ADE | NORMAL |
|
|
| ||||||
|
|
|
|
|
|
| REMOT E | AUTO |
|
|
|
|
|
|
| ON | |
|
|
|
|
|
|
| DEMO MODE | O F F |
|
|
|
|
|
|
|
|
|
3 Press the DISPLAY button to turn off the menu screen.
Note:
•The demonstration will stop if you press the MENU button. If you leave it for 60 seconds, or turn the power off temporarily and then set the Power switch to CAMERA, the demonstration will begin again.
3 Press the MENU button until
appears.
•If MENU 1 or 3 appears on the screen, press the PAGE button (
) to display MENU 2.
4 Press or (C or D) button (Q) to select “DEMO MODE”, then press the SET button (B) (W) to select “ON”.
•The demonstration begins.
|
|
|
|
|
|
| MENU | 2 |
|
|
| S E T |
|
|
| F ADE | NORMAL |
|
|
| ||||||
|
|
|
|
|
|
| REMOT E | AUTO |
|
|
|
|
|
|
| ON | |
|
|
|
|
|
|
| DEMO MODE | ON |
|
|
|
|
|
|
|
|
|
References
58
