(3)PRICE
Input a unit price in the textbox, which can range from 0 to 999999.99. The default value is zero.
(4)PROGRAM
•Dept. No.
Input the code of the department where the PLU data is supposed to be classified. The code can range from 1 to 99. The default value is 1.
• Amount Entry Type
You can select a registration method by checking “OPEN”* and/or “PRESET.”* The default setting is PRESET. When you check both “OPEN” and “PRESET,” it is set as “OPEN &PRESET.” When you check neither “OPEN” or “PRESET,” it is set as “INHIBIT.”* This item is active only when you have selected a PLU code.
*Note For details of register settings refer to the Instruction Manual of
(5) PLU CODE
The selected PLU code is displayed.
You can see another PLU data by the following procedure.1 1. Click inside of the PLU CODE textbox.
The PLU code input dialog box appears.
2. Input a PLU code in the textbox.
2
3. Click [OK].3 Data with the selected code are shown on the PLU screen.
You can also change the PLU code selection with the [<] button or [>] button.
(6)Get from SD
Click this button to read the PLU data from an SD memory card.
(7)Send to SD
Click this button to write the PLU data to an SD memory card.
●To create PLU data
You can create new PLU data with the following procedure. 1. Click [Record], and then [New].
1
18