(4)TAX & AMOUNT

You can set taxes with the tax table.

When you select "%TAX" as a tax calculation type, you can input only the value of the highest row of the table (the tax exemption limit).

When you select "TABLE TAX," refer to the next subsection "To set taxes with the tax table."

(5)Table tax adjustment

After inputting taxes and amounts in the table above, click this button to check whether the table is set appropriately. Duplicate cycle data is removed. An error message appears in cases below:

•TYPE is not “TABLE TAX”

•RATE is “0”

•Figures are not arranged in an ascending order

•The quantity of Amount data values is not sufficient

(6)CYCLE

The cycle is calculated when you click “Table tax adjustment.” You can also input the value manually. The default value is “0.00.” Also refer to “Tax Programming” on page 81 in the Instruction Manual of XE-A207 and XE-A23S.

(7)TAX NO.

The selected tax number is displayed. You can also change the tax number selection with the [<] button or [>] button.

(8)Get from SD

Click this button to read the tax data from an SD memory card.

(9)Send to SD

Click this button to write the tax data to an SD memory card.

27