Sharp XG-C330X Setting and Adjusting the, Setting the Security, Projector Settings & Adjustments

Controlling the Projector via LAN

Setting and Adjusting the

Projector (Settings & Adjustments)

Example: “Picture” screen display for INPUT 1

On these screens, you can make projector settings or adjustments.You can set or adjust the following items :

•Picture Mode

•CLR Temp

•Progressive (Video)

•Signal Type (Computer, DVI)

•Dynamic Range (DVI)

•Video System (Video)

•Resolution Setting

•Auto Sync

•Resize

•Auto Keystone

•OSD Display

•Background

•Eco/Quiet Mode

•Auto Power Off

•System Sound

•Menu Position

•Direct Power On

•Password

•Internal Speaker

•Audio Out

•Projection Mode

•Fan Mode

•Monitor Out

•RS-232C Speed

•All Reset

•Language

Note

•If you click the “Refresh” button before the screen is displayed completely, an error mes- sage (“Server Busy Error”) will be displayed. Wait for a moment and then operate again.

•You cannot operate this page while the pro- jector is warming up.

•For details about each item, refer to the projector’s operation manual.

Setting the Security

(Network – Security)

On this screen, you can make settings relat- ing to security.

	Items	Description
User Name		Setting of user name for
		security protection.
Password		Setting of password for
		security protection.
Accept IP		It is possible to set up to three
Address		IP addresses allowing connec-
		tion to the projector.
	All IP	No limits are set to IP addresses
	Addresses	connecting to the projector.
	From only	For security improvement, only an
	specific IP	IP address set by “Address 1-3”
	addresses	can be connected to the projector.

Note

•User Name and Password can be up to 8 characters.

•You can input the characters below : a-z, A-Z, 0-9, -, _

-26