SETUP MANUAL
XG-C430X XG-C335X XG-C330X
LCD PROJECTOR
MODEL
Setting up the Screen
Standard Setup Front Projection
Side View
Example of standard setup
The graph below is for 100 inches 254 cm screen with 43 normal mode
Screen Size and Projection Distance
Throw Distance
Screen
Standard Zoom Lens
Screen Size and Projection Distance
F1.7-F1.9, f=28.0-33.6 mm
NORMAL Mode
Wide-zoom Lens AN-C12MZ
F2.2-F2.7, f=24.5-30.7 mm
NORMAL Mode
STRETCH Mode
Tele-zoom Lens AN-C18MZ
F1.7-F2.2, f=36.5-46.3 mm
NORMAL Mode
STRETCH Mode
Tele-zoom Lens AN-C27MZ
F2.0-F2.8, f=53.8-82.9 mm
NORMAL Mode
STRETCH Mode
Tele-zoom Lens AN-C41MZ
F2.1-F2.8, f=83.5-117.2 mm
NORMAL Mode
STRETCH Mode
Remove the lens by pulling it straight out
Changing the Lens
Remove the protection cap from the back of the new lens
Changing the Lens
Replace the lens housing cover
5 Insert the lens into the projector
Connecting Pin Assignments
RS-232C Cable recommended connection 9-pin D-sub female connector
Signal
Signal
Connecting Pin Assignments
DVI-D Input Terminal
Pin No. Signal
Pin No. Signal
RS-232C Specifications and Commands
Computer control
Communication conditions
Basic format
Commands
RS-232C Specifications and Commands
Example When turning on the projector, make the following setting
P O W R
RS-232C Specifications and Commands
PARAMETER
RS-232C Specifications and Commands
RS-232C Specifications and Commands
5 Lamp Timer Reset command is available only in standby mode
PJLinkTM Compliant
For additional information, visit “http//pjlink.jbmia.or.jp/english/”
Setting up the Projector Network Environment
Network settings on the computer
1. Connecting the projector to a computer
2. Setting an IP address for the computer
1. Connecting the Pro- jector to a Computer
Setting up the Projector Network Environment
3 Plug the power cord into the AC socket of the projector
4 Turn on the computer
2. Setting an IP Address for the Computer
2 Click “Start”, and click “Control Panel”
Right-click “Local Area Connec
tion” and select “Properties”
jector”
Setting up the Projector Network Environment
1 Start Internet Explorer version
3. Setting up a Network Connection for the Projector
Setting up the Projector Network Environment
Click the “Apply” button
Setting up the Projector Network Environment
Controlling the Projector Using Internet Explorer
Controlling the Projector via LAN
Version 5.0 or later
1 Start Internet Explorer version 5.0 or later on the computer
Confirming the Projector
Controlling the Projector
Controlling the Projector via LAN
Status Status
Setting and Adjusting the
Setting the Security
Projector Settings & Adjustments
Network - Security
Making General Settings for the Network Network
Setting for Sending E-mail when an Error Occurs
Mail - Originator Settings
General
Mail - Recipient Settings
Occurs Service & Support Access URL
Example of the display when an error occurs
Controlling the Projector via LAN
Setting up the Projector Using RS-232C or Telnet
When Connecting Using RS-232C
7 Input “setup” and press the “Enter” key
“Password” is displayed. Input the password and press the“Enter”key
When Connecting Using Telnet
Setting up the Projector Using RS-232C or Telnet
6 Input “setup” and press the “Enter” key
5 “Password” is displayed. Input the password and press the“Enter”key
SETUP MENU Main Menu
ADVANCED SETUP MENU
Setting up the Projector Using RS-232C or Telnet
SETUP MENU
View Setting Detail List
VView All Setting
Set Items
Setting up the Projector Using RS-232C or Telnet
Save Settings and Quit
Quit without Saving Set
SSave & Quit
tings QQuit Unchanged
IP Address Setting
Default Gateway Setting
Subnet Mask Setting
User Name Setting
Password Setting
Projector Name Setting
DHCP Client Setting
5Password
Disconnecting All Connec
Setting Auto Logout Time
Entering ADVANCED SETUP MENU
Data Port Setting
Setting of Accept IP Ad- dress
Carrying out Network Ping Test
Accepting All IP Addresses
ADVANCED5Network Ping Test
Setting of Search Port
Return to Default Settings
ADVANCED!Restore Default Setting
Return to Main Menu
Resetting the Lamp Timer of the Projector via LAN
code” field. From the “Connect using” drop-down menu, select
2 Enter a name in the “Name”field, and click “OK”
3 If you are required to enter the area code, enter it in the “Area
Resetting the Lamp Timer of the Projector via LAN
6 Click the “Settings” tab, and then click “ASCII Setup”
Send the lamp reset command “LPRE0001”
5 Click “Properties” on the “File” menu
Troubleshooting
When connecting the projector using serial-connection
Check the network settings for the computer and the projector
For network settings for the projector, refer to page
Troubleshooting
Usage examples of ipconfig
C\ipconfig /? displays how to use “ipconfig.exe”
C\ipconfig
Troubleshooting
Dimensions
Units inches mm
Top View
Side View
Projector and Lens Dimensions
Dimensions
When AN-C12MZ is installed
When AN-C18MZ is installed