Adjust the projector angle
•Adjust the projector angle using the Height Adjustment buttons.
•Rotate the Tilt dial to adjust the horizontal tilt of the projector.
Height Adjustment
buttons
Tilt dial
•This projector is equipped with an “Auto Keystone Correction” function that automatically corrects any trapezoidal distortion within the projected image.
Start QuickPages 31, 32Bring the projected image into focus | Adjust the projected image size |
• Bring the projected image into focus by | • Adjust the projected image size by moving the |
rotating the focus ring. | zoom knob. |
Focus ring | Zoom knob |
out
Zoom
in
Zoom
Page 33
6. Select the INPUT modeSelect the “COMPUTER 1” using the INPUT buttons on the projector or the COMPUTER 1 button on the remote
control. | On the remote | " INPUT list | " | |
On the | ||||
projector | control | INPUT |
| 1 COMPUTER 1 |
|
|
| ||
|
|
|
| RGB |
|
| 1 | COMPUTER 1 | 1024 ⋅ 768 |
|
| 2 | COMPUTER 2 |
|
•When using the remote control, press ////to switch the INPUT mode.
Page 34
7.Turn the Power offPress the STANDBY button, then press that button again while the confirmation message is displayed, to put the projector into standby mode.
On the projector | On the remote control | " |
•Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while.
Page 30