2Speaker Setting
This function allows you to set the audio output of the internal speaker to “On” or “Off” such as when the projector is connected to an external amplifier.
Selectable items | Description |
On | The audio signal is output from the internal |
| speaker. |
Off | The audio signal is not output from the |
| internal speaker. |
Menu operation | Page 42 |
5Fan Mode Setting
This function changes the fan rotation speed.Selectable items | Description |
Normal | Suitable for normal environments. |
High | Select this when using the projector at |
| altitudes of approximately 1,500 meters |
| (4,900 feet) or more. |
When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.
3Audio Output Type Setting
This function determines whether the audio level output from the AUDIO output (MONITOR output) terminal is fixed or variable by linking with VOL- UME.
Selectable items | Description |
FAO | Audio output that does not vary in |
(Fixed Audio | strength with the volume level of the |
Output) | source projector. |
VAO | Audio output that varies in strength with |
(Variable | the volume level of the source projector. |
Audio Output) |
|
Info
•When “Audio Out” has been set to “VAO”, first make sure to lower the volume of the projector before turning the power on or off and when switching the input.
4Reversing/Inverting Pro- jected Images
This projector is equipped with a reverse/invert image function that allows you to reverse or invert the projected image for various applications.
Selectable items | Description |
Front | Normal image (Projected from the front |
| of the screen) |
Ceiling + Front | Inverted image (Projected from the |
| front of the screen with an inverted |
| projector) |
|
|
Rear | Reversed image (Projected from the |
| rear of the screen or with a mirror) |
Ceiling + Rear | Reversed and inverted image (Pro- |
| jected with a mirror) |
|
|
Note
•This function is used for the reversed image and
6Monitor Output
7LAN/RS232C
When set to “Enable”, the function is activated and power is consumed even in the standby mode. It is recommended that the function be set to“Dis- able”when it is not connected.This reduces power consumption when the projector is in the standby mode.
Selectable items | Description |
Enable | The function is activated even if the |
| projector is in standby mode. |
Disable | The function is switched off when the |
| projector is in standby mode. |
|
|
Note
•When you want to control the projector using the LAN/RS232C function, select “Enable”.
8Selecting the Transmis- sion Speed (RS-232C)
Make sure that both the projector and computer are set for the same baud rate.Selectable items | Description | |
9600 bps | Transmission speed is slow. | |
|
|
|
38400 bps |
|
|
|
| |
|
|
|
115200 bps | Transmission speed is rapid. | |
|
|
|
Note
•Refer to the “SETUP MANUAL” contained on the supplied
•Refer to the computer’s operation manual for instructions for setting the computer’s baud rate.
-52