Using the “Options1” Menu
When System Lock is setWhen System Lock is set, the keycode input screen appears after the power is turned on.
When it appears, enter the right keycode to start projection. Failure to enter the keycode will cause images not to be projected even when signals are entered to the projector.
▼Input screen for keycode
Note
•If no keycode is entered, the image will not be displayed, even if the projector receives the in- put signal.
wAuto Restart Function
Selectable items | Description |
On | If the power cord is unplugged from the |
| outlet or the breaker switch is turned off |
| when the projector is on, then the |
| projector automatically turns on when |
| the power cord is plugged into the AC |
| outlet or the breaker switch is turned on. |
Off | The projector does not turn on auto- |
| matically when the power cord is |
| plugged into the AC outlet or the |
| breaker switch is turned on. |
Menu operation | Page 42 |
Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.
Keylock function ON
•The keylock function does not affect the opera- tion with the remote control buttons.
•You cannot use the keylock function while the projector is warming up.
■Taking the Keylock OffHold down ENTER on the projector for about 5 seconds.
Keylock function OFF
•When the projector is in standby mode, you can
release the keylock by holding down ENTER and STANDBY/ON on the projector simul- taneously for about 5 seconds.
Info
•You can activate the keylock function only when no