Replacing the Air Filter
•This projector is equipped with air filters to ensure the optimal operating condition of the projector.
•Ask your nearest Sharp Authorized Pro- jector Dealer or Service Center to ex- change the filter (PFILDA022WJKZ) when it is no longer possible to clean.
Replacing the Air Filter
1 Press STANDBY/ON on the projector or STANDBY on the remote control to put the projector into the standby mode.
•Wait until the cooling fan stops.
2 Disconnect the power cord.•Unplug the power cord from the AC socket.
3 Remove the filter cover.•Turn over the projector. Pull down the car- rying handle (1), grab the tab (2) and slide open the filter cover (3).
4 Remove the air filter.•Pick the air filter up with your fingers and lift it out of the filter cover.
STANDBY buttonSTANDBY/ON buttonAC socket
3
2
1
Tab