Using the Remote Control as the Wireless Computer Mouse

When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse.

If the computer is placed too far away from the projector to be connected via the USB cable, the separately sold remote receiver (AN-MR2) makes it possible to operate the projector with the remote control. For de- tails, see the operation manual of the receiver.

Connecting with a USB cable

Computer

USB terminal

 

Point the remote control at

or

the USB remote receiver

(AN-MR2, optional)

 

To USB terminal

USB cable

(commercially available or available as Sharp service part QCNWGA014WJPZ)

The mouse pointer can be operated in the following way after it is connected.■When moving the cursor

Press MOUSE/Adjustment buttons ('/"/\/).

■When left-clicking

Press L-CLICK.

■When right-clicking

Press R-CLICK.

■When your computer supports only a one-click mouse (such as Macintosh)

Press L-CLICK or R-CLICK.

L-CLICK and R-CLICK have common function.

■When using [Page Up] or [Page Down]

MOUSE/Adjustment buttons ('/"/\/)

R-CLICK button

PAGE Up/Down buttons

L-CLICK button

Operation Basic

Same as the [Page Up] and [Page Down] keys on a computer keyboard.

Press or PAGE.

Note

•This function only works with the Microsoft® Windows® OS and Mac OS®. However, this function does not work with the following operation systems that do not support USB.

•Versions earlier than Windows® 95

•Versions earlier than Windows® NT4.0

•Versions earlier than Mac OS® 8.5

•You cannot use this function when displaying the menu screen.

•Confirm that the computer recognizes the USB connection.

•If “Resize” is displayed when signals having a higher resolution than XGA are being input and you have set “Dot By Dot” as the screen size, you cannot operate the mouse function.

-39