Image Projection
Using the Adjustment Feet
The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector, the screen is inclined or when the installation site is slightly inclined.
Install the projector so that it is as perpendicular to the screen as possible.
| Side View |
| Top View |
Lens 
center
•The adjustment feet come out.
2 Lift the projector to adjust its height and remove your hands from the Height Adjustment but- tons.
•The projector is adjustable up to approxi- mately 9 degrees.
3 Rotate the Tilt dial to finely adjust the horizontal tilt of the pro- jector.•The inclination is adjustable within ap- proximately 2 degrees.
•When adjusting the height of the pro- jector, trapezoidal distortion occurs. When “Auto Keystone” of the “Options1” menu is set to “On” (see page 48), key- stone correction functions automatically to correct trapezoidal distortion. When you want to adjust the automatically cor- rected image, use the manual keystone correction. (See page 32.)
Info
•Do not press the Height Adjustment button when the adjustment feet come out without firmly holding the projector.
•Do not hold the lens when lifting or lower- ing the projector.
•When lowering the projector, be careful not to get your fingers caught in the area be- tween the adjustment foot and the projector.
Operation Basic
-31