9Setting the System Sound
Selectable items | Description |
On | A confirmation sound is made when the |
| projector turns on/off. |
Off | No confirmation sound is made. |
Menu operation | Page 42 |
0Selecting the Menu Screen Position
Select “Menu Position” on the “Options1” menu and the desired position for the menu screen.
Selectable items | Description |
Center | Displayed on the center of the image. |
Upper Right | Displayed on the upper right of the image. |
Lower Right | Displayed on the lower right of the image. |
Upper Left | Displayed on the upper left of the image. |
Lower Left | Displayed on the lower left of the image. |
qSystem Lock Function
This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access.
Info
•If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Ser- vice Center (see page 66). Even if the product war- ranty is valid, the keycode reset will incur a charge.
Setting/Changing the keycode1 Select “System Lock” on the “Op- tions1” menu, then press .
•A message is displayed.
•Read this message, and press 
ENTER.
•The screen for entering the keycode ap- pears.
2 Press the 4 buttons on the remote control or on the projector to enter the preset keycode in “Old Code”.
•When setting the keycode for the first time, press " on the projector for four times.
Note
•If you input a wrong keycode, the cursor returns to the first point of the “Old Code”.
•The preset keycode is 4 " buttons on the projec- tor. If this keycode is set, the keycode input screen does not appear when turning the power on.
3 Press the 4 buttons on the remote control or on the projector to enter the new keycode in “New Code”.
Note
•You cannot use the following buttons for keycode:
•STANDBY/ON button
•ON button
•STANDBY button
•ENTER button
•
•
•MENU button
•ECO+QUIET button
•BREAK TIMER button
•System lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If you used the buttons on the projector in setting your keycode, the keycode cannot be canceled with the remote control.
4 Enter the same keycode in“Reconfirm”.
Note
To cancel the keycode that you have already set
•Press " on the projector for four times in steps 3 and 4 above.
Features Useful
-49