Setting up the Projector

Projecting a Reversed Image

Projection from behind the Screen

■Place a translucent screen between the projector and the audience.

■Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 59.)

Translucent screen

Audience

Projection Using a Mirror

■Place a mirror (normal flat type) in front of the lens.

■When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode” menu. (See page 59.)

■When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page 59.)

Set to “Front”

Set to “Rear”

Mirror

Translucent screen

Audience

Audience

Mirror

Info

•When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected light does not shine into the eyes of the audience.

Ceiling-mount Setup

■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation.

Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately).

• AN-MBCM10 ceiling-mount bracket, its AN-EP101B extension tube and AN-JT200 universal bracket, adaptor for non-level ceiling installation (for U.S.A.).

•AN-60KT ceiling-mount bracket, its AN-TK201 and AN-TK202 extension tubes (for countries other than the U.S.A.).

■Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See page 59 for use of this function.

-20