Setting On-screen Display

This function allows you to turn the on-screen messages on or off.

Menu operation Page 42

Example: “Options1” screen menu for INPUT 1 (RGB) mode

Description of “OSD Display” Settings

Selectable items

Description

(ON)

All On-screen Displays are displayed.

 

 

 

• INPUT/VOLUME/AV MUTE/FREEZE/

 

AUTO SYNC/ENLARGE/ “An invalid

 

button has been pressed.” are not

(OFF)

displayed.

• “All buttons on Projector are locked.” is

 

displayed when the STANDBY button is

 

pressed while the Keylock function is

 

active.

 

 

Setting the Video System

The video input system mode is factory preset to “Auto”; however, a clear picture from the connected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal.

Menu operation Page 42

Example: “Options1” screen menu for INPUT 3 (Video) mode

Description of Video Systems

Selectable items

Description

PAL

When connected to PAL video equipment.

SECAM

When connected to SECAM video equipment.

NTSC4.43

When reproducing NTSC signals in PAL

 

video equipment.

NTSC3.58

When connected to NTSC video equipment.

Note

•The video signal can only be set in INPUT 3 or INPUT 4 mode.

•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.

Features Useful

-51