Helpful Functions Set during Installation (“Options2” menu)

Setting a Password

•There is no factory preset for the password, so the "Options2" menu is enabled.

•If you do not want others to operate the "Op- tions2" menu, set a password.

Menu operation Page 42

Example: “Options2” screen menu

Changing the Password

1Press ', " and to enter the password in “Old Password” and press .

2Press ', " and to set the new password in “New Password” and press .

3 Enter the same 4-digit password in

“Reconfirm” and press

Note

.

1Select "Password" from the "Op- tions2" menu, and press .

•The screen for entering the password is displayed.

2Press ' or " to set the first digit in “New Password” and then press .

3Enter the remaining 3 digits and press .

4Enter the same password in “Re- confirm” and press .

Note

•The password must be entered to use the “Op- tions2” menu when a password has been set.

•If you do not want to set a password, leave the

fields blank in steps 2 and 3 and press .

•To cancel the password settings, press .

If You Forget Your Password

If you forget the password, delete it using the following procedure and set a new password.

Press

.

 

Note

•If is held down for more than 3 seconds, the op- eration buttons on the projector will be locked. (See page 55.)

•You can only use the buttons on the projector to de- lete the password.

-56