Connecting to Video Equipment

The projector has a COMPUTER/COMPONENT terminal, an S-VIDEO terminal and a VIDEO terminal for video input. See the illustration below to connect with the audio-visual equipment.

The image quality is highest in order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER-RGB/COMPONENT terminal (INPUT 1 or INPUT 2) on the projector for video connection.

When connecting video equipment with component video output terminal

(When connecting to INPUT 1)

To audio output terminal

 

To AUDIO

 

 

To component video output terminal

To INPUT 1 terminal

INPUT 1, 2 terminal

Video Equipment

3 RCA (Component) to

15-pin D-sub cable (optional: AN-C3CP)

ø3.5 mm minijack to RCA audio cable (commercially available)

Note

•ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.

Connections

-25