Problem

Check

Page

Picture is green on

• Change the input signal type setting.

47

INPUT 1 (COMPONENT)/

 

 

INPUT 2 (COMPONENT).

 

 

Picture is pink (no green)

 

 

on INPUT 1 (RGB)/

 

 

INPUT 2 (RGB).

 

 

Picture is too bright and

• Image adjustments are incorrectly set.

44

whitish.

 

 

The cooling fan

• When temperature inside the projector increases, the cooling

—

becomes noisy.

fan runs faster.

 

The lamp does not light

• The lamp indicator is illuminating in red.

64

up even after the

Replace the lamp.

 

projector turns on.

 

 

The lamp suddenly turns

 

 

off during projection.

 

 

The image sometimes

• Cables incorrectly connected to the projector or the connected

23,25-28

flickers.

equipment works improperly.

 

 

• If this happens frequently, replace the lamp.

67

The lamp takes a long

• The lamp will eventually need to be changed.

67

time to turn on.

The lamp has reached the end of its life. Replace the lamp.

 

Picture is dark.

 

 

 

 

 

This projector is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation or interference. If this should happen, unplug the projector and plug it in again after more than 30 seconds.

Appendix

-71