Sharp XL-HF401PH Wi-Fi network Setup for AirPlay / Dlna, Connection via wireless router with WPS

Setting the clock (Remote control only) (continued)

6 On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’. On the PC/Mac, enter the list of available wireless networks.

5To adjust the hour, press the or button and then press the ENTER

button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously.

6To adjust the minutes, press the or button and then press the

ENTER button. Press the or button once to advance the time

SHARP_XL-HF401

by 1 minute. Hold it down to advance the time by 5 minutes interval.

Wi-Fi

To confirm the time display:

Press the CLOCK/TIMER button. The time display willSHARP_XL-HF401appear for about 5 seconds.

Note:

When power supply is restored after unit is plugged in again or after a power failure, reset the clock (pages 6 - 7).

To readjust the clock:

Perform “Setting the clock” from step 1. If the “Clock” does not appear in step 2, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.

To change the 24-hour or 12-hour display:

1Clear all the programmed contents. [Refer to “Factory reset, clearing all memory” on page 23 for details.]

2Perform “Setting the clock” from step 1 onwards.

Wi-Fi network Setup for AirPlay / DLNA

For other DLNA compatible devices, turn on the Wi-Fi. For more details, refer to your devices’ manual.

7Select SHARP_XL-HF401from the list of available networks.

8Launch Music and play desired song on your iPod touch / iPhone or iPad. For PC/Mac, launch iTunes.

For other DLNA compatible devices, launch the DLNA compatible media software. For more details, refer to your devices’ manual.

9Tap / click on the AirPlay icon .

Select the speaker : SHARP_XL-HF401_xxxxxx.

Sound will be heard from the XL-HF401 speakers via audio streaming.

Note: The last 6 digits ‘xxxxxx’ is MAC ID.

(AirPlay)

With Apple AirPlay technology, you can stream your music from your iTunes on a Mac, PC, iPod touch, iPhone, or iPad to external speakers (XL-HF401PH) via a Wi-Fi network.

AirPlay usage requires:

●MacBook or MacBook Pro running MacOS 10.6.6 or greater.

●iTunes 10.2 or greater (Mac/PC).

●iOS 4.3 or later

-iPod touch (4th, 3rd and 2nd generation)

-iPhone 4S

-iPhone 4

-iPhone 3GS (iPhone 3G cannot support AirPlay)

-iPad 2

-iPad

(DLNA)

DLNA technology enables you to share media from one device to another via a Wi-Fi network.

DLNA usage requires:

●DLNA compatible devices with appropriate application. (Refer to your devices’ manual) Support status varies depending on model and software features such as client and server functions.

●PC with Windows 7.

●DLNA version 1.5

●This product supports audio source with playback capability only. Streaming (audio and video) from DLNA devices is not supported by this product.

●DRM file playback (DTCP-IP) is not supported.

●SHARP does not guarantee that this product will work with all DLNA compatible devices and wireless LAN routers.

Note:

When this unit is placed too near a Wireless LAN device or microwave, noise interference may occur, causing crackling sound. It may also reduce the communication speed and cause invalid connection. If these happen, do the following:

-Place the unit away from the Wireless LAN device or microwave.

-Place the unit closer to the source device.

SHARP_XL-HF401_xxxxxx

■Connection via wireless router with WPS

1 Press the WPS button on the wireless router.

WPS

2Press the ON/STAND-BY button.

3Press the NETWORK button.

4Press the iPod MENU button on the remote control.

5Press the / button to select ‘Wi-Fi Setup’. Press the ENTER button.

6Press the / button to select ‘WPS’. Press the ENTER button. Wait

until ‘ ’ on the display stop blinking and the display shows

"Successfully Connected to [network name]".

7On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’. On the PC/ Mac, enter the list of available wireless networks. For other DLNA compatible devices, turn on the Wi-Fi. For more details, refer to your devices’ manual.

8Select your router from the list of available networks. Enter your network password if required.

■Direct wireless connection

1	Press the ON/STAND-BY button.			9 Continue with step 8 to 9 in ‘Direct wireless connection’
2	Press the NETWORK button.
3	Press the iPod MENU button on the remote control.			on this page.
4	Press the	/	button to select ‘Wi-Fi Setup’.	Note:
5	Press the ENTER button.			WPS process (network search) takes about 2 minutes. If
	Press the	/	button to select ‘Direct’. Press the ENTER
				fail to connect, the display will show ‘Cannot connect to

button. Wait until the display shows ‘Direct Ready’ which		Network. Please try again’. Repeat step 4 to retry.
take about 40 seconds.
	E-7