-51
Adjustments and Settings
Using the “Options” Menu
Remaining lamp life
100% 5%
Approx. Approx.
4,000 hours 200 hours
Approx. Approx.
3,000 hours 150 hours
Lamp usage condition
Operated exclusively
in Eco mode
( )
Operated exclusively
in Standard mode
( )

Checking the Lamp Life

Status

You can confirm the cumulative lamp usage
time and the remaining lamp life (percentage).

Display the “Options” menu to check

the lamp life status.

➝For operating the menu screen, see
pages 38 to 41.
Note
•It is recommended that the lamp be
changed when the remaining lamp life
becomes 5%.
For lamp replacement, contact your near-
est Sharp Authorised Projector Dealer or
Service Centre.
•The table above indicates rough estimates
in the case of using only in each mode
shown. Remaining lamp life changes within
the range of the values shown depending
on the frequency at which “Eco Mode” is
switched to “ ” (Eco mode) and “ ”
(Standard mode) (see page 53).

Turning on/off the On-

screen Display

This function allows you to turn on or off the
on-screen messages that appear during input
select.

Select “OSD Display” in the “Options”

menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
On-screen Display
On-screen Display
(ON)
(OFF)
All On-screen Displays are
displayed.
INPUT/FREEZE/AUTO SYNC/
“An invalid button has been
pressed.” are not displayed.
Selected Item
Description
XV_Z200E_E_p51_56.p65 03.10.30, 13:15PM51