Installing a Blade

Turn the C242 upside down so the gear case output shaft is facing UP and remove the shaft bolt, bolt guard and holder B from the gear case shaft.

1.Align the hole in blade holder A with the matching hole in the gear case flange and then temporarily lock the output shaft by inserting a hex wrench through both holes.

See Figure 12.

2.Fit the blade over the flange on holder A. See Figure 13.

IMPORTANT!

Both holders must be flat against the surface of the blade.

3.	Install blade holder B on the output
	shaft. See Figure 13.
4.	Install the bolt guard and then the blade
	retaining bolt. Using the combination
	spark plug wrench/screwdriver, tighten
	the bolt firmly in a counter-clockwise
	direction. The holder B must fit flush
	against the blade.

Shaft Bolt

Bolt Guard

Holder B

Output Shaft

Holder A

Hex

Wrench

Figure 12

CAUTION!

Install the blade so its printed surface is visible to the operator when the brushcutter is in the normal operating position.

WARNING!

The blade must fit flat against the holder flange. The blade mounting hole must be centered over the raised boss on blade holder A.

WARNING!

Holder B must fit flush against the blade with the splines engaged to the output shaft.

5. Remove the hex wrench.

The C242 should now be com- pletely assembled and ready for use with a blade.

Output

Blade Shaft

Blade Holder B	Hex Wrench

Tighten the assembly (blade

Figure 13

not shown for clarity)

81359 specifications

The Shindaiwa 81359 is a powerful and efficient tool designed for landscaping professionals who seek performance and reliability. This multi-purpose piece of equipment excels in various tasks, including trimming, cutting, and clearing, thus providing an essential addition to any outdoor toolkit.

One of the primary features of the Shindaiwa 81359 is its robust engine. Equipped with a high-performance 25.4cc two-stroke engine, the unit delivers ample power to tackle even the most demanding jobs. This engine is designed for efficiency and durability, ensuring that it can withstand the rigors of daily use in professional environments.

The Shindaiwa 81359 also incorporates advanced technologies to enhance operator experience and productivity. The unit features advanced vibration dampening technology, which significantly reduces the amount of vibration transmitted to the user. This results in increased comfort during prolonged use, minimizing fatigue and allowing for more extended periods of operation without compromising performance.

Another notable characteristic of the Shindaiwa 81359 is its lightweight design. Weighing in at just under 10 pounds, the tool is easy to maneuver, making it suitable for various landscaping tasks. The well-balanced design further aids in reducing strain on the operator, making it an ideal choice for residential or commercial landscaping work.

The cutting capabilities of the Shindaiwa 81359 are impressive, with a user-friendly, easy-to-adjust cutting head that allows for quick changes between different trimmer heads or attachments. This versatility equips the operator to seamlessly shift between different tasks, whether edging, trimming, or clearing thick brush.

Moreover, the Shindaiwa 81359 prioritizes environmental consciousness with its low-emission engine design. This aspect is crucial in today’s eco-aware market, where reducing environmental impact is a priority for many professionals and their clients.

In summary, the Shindaiwa 81359 stands out for its powerful 25.4cc engine, advanced vibration dampening, lightweight, ergonomic design, and versatility in cutting options. Ideal for landscaping professionals, its combination of efficiency and user comfort makes it a top choice for tackling a wide range of outdoor tasks.

Shindaiwa 81359 Installing a Blade, Both holders must be flat against the surface of the blade

Models: 81359