The range of COMOS training courses has
been complemented by six further courses.
We would like to introduce three of these
courses in a little more detail below. In the
Basic, Cabinet Layout, and MRO (Maintenance
Repair Overhaul) courses, up to six partici-
pants per course will be introduced to specif-
ic course content in a very practice-oriented
way. The COMOS Basic Training contains the
fundamentals of working with the COMOS
software, while the Cabinet Layout Training is
aimed at experienced COMOS users from the
area of electrical engineering. The new MRO
training course is aimed at maintenance engi-
neers, and it presents options for optimizing
maintenance tasks. To achieve maximum
learning success, the experienced COMOS in-
structors give special attention during the
courses to participants‘ needs. You can find
out more about the content of the courses by
clicking on the relevant course.
Comos training program expanded

Training courses have been complemented

by six further courses

2. COMOS Cabinet Layout Training
This is intended as advanced training for ex-
perienced users with knowledge gained from
COMOS Electrical Engineering Training. This
course introduces methods and tools for
planning control cabinets. The focus is on
creating views, synchronizing these views,
and working with the COMOS rail editor.
more ... »
All COMOS training courses can also be
booked locally for specific customers around
the world. You can request information on
other training courses via the e-mail address
training. COMOS @siemens.com Information
on COMOS training courses is also available
on the Internet.

Training course descriptions

1. COMOS Basic Training
COMOS Basic Training is aimed at planning
engineers, drafters, or trainee COMOS admin-
istrators. It covers the philosophy of COMOS,
the handling of technical documentation,
and specific objects for electrotechnical plan-
ning.
more ... »
3. COMOS MRO Training
(Maintenance Repair Overhaul)
The COMOS MRO (Maintenance Repair Over-
haul) Training is aimed at users and trainee
COMOS administrators. Participants learn
about the basic functionalities of COMOS for
working with the interface. Different mainte-
nance methods and documents are then in-
troduced and created.
more ... »
18 COMOS Plant Manager | 3/2012
NEWS