Putting the handset into service
Putting the handset into service
Removing the protective cover
Remove the protective cover from the display before putting the handset into service.
Inserting the batteries
Two batteries are provided with the handset. The batteries are supplied un- charged. They are charged in the handset.
Note:
•Please observe the safety notes on the back cover.
•Only use approved batteries (Æ page 15).
•Always replace both batteries at the same time and only use two batteries of the same type/ from the same manufacturer!
•Open the battery compartment in a
•Your telephone directory entries and all settings remain stored even if you remove the batteries. The date and time settings will be reset.
•Only remove the batteries if they are defective. Any unneces- sary removal of the batteries reduces their lifespan.
Opening the battery compartment
Press down on the ridged surface and slide the cover from the battery compartment.
Inserting batteries
Insert the correct batteries according the the pole directions as marked.
Closing the battery compartment
Put the cover back in place and slide it onto the battery compartment until it engages.
13
