Siemens 500 manual Call charge display, Activating/deactivating do not disturb, Step-by-Step

Conducting calls – enhanced functions

Step-by-Step

c

Menu

>< Do Not Disturb ON? [

a

c

Menu

>< Do Not Disturb OFF? [

a

Activating/deactivating do not disturb

You can block calls to your handset on a temporary ba- sis, while still being able to make calls yourself. Internal callers hear the busy tone, while external callers reach another telephone defined by the service engineer (in- tercept position). Authorised internal callers automati- cally override the do not disturb after five seconds.

Activating do not disturb

Press the Talk key.

Call the system menu.

Select and confirm the menu item.

Press the On-hook key to end the process.

Deactivating do not disturb

Press the Talk key.

Call the system menu.

Select and confirm the menu item.

Press the On-hook key to end the process.

Call charge display

After a call has ended, the display shows the connec- tion charges for the current call as standard. If the costs are to be displayed continuously during an outgoing call, this function must be requested from the carrier.

Note:

If a call is transferred, the costs are assigned to the telephone to which the call was transferred from this point onwards.

You can check and display the call charges for your phone number as a total for a period that can be set by the service engineer.

First the call charges for the last charged call are dis- played. The total call charges are displayed after five seconds.

41