Siemens 500 Activating control relays, #o a, Step-by-Step, Conducting calls - enhanced functions

Conducting calls – enhanced functions

Step-by-Step

			c
		Menu
><			[
	Service?
><			[
	*42=Tel. data
	service?
	TDS code:

#o

a

				c
		Menu
><			[
	Service?
><				[
	On?
	*90=Control Relay
				o
				a

Press the Talk key.

Call the system menu.

Select and confirm the menu item.

Select and confirm the menu item.

Press the "#" key and enter the required code (0... 9).

The connected computer responds. The computer will guide you through the data entry process. It will proc- ess your entries directly.

Press the On-hook key to end the process.

Activating control relays

The service engineer can set up a maximum of 4 control relays that enable various equipment (e.g. door opener) to be activated and deactivated.

It is possible to access a specific control relay. Depend- ing on the configuration, the control relays can be

•activated and deactivated automatically, or

•activated and deactivated automatically on the basis of a timer.

Prerequisite: The service engineer has set up at least one switch.

This function can also be called by entering the code (Æ page 88).

Activating a control relay

Press the Talk key.

Call the system menu.

Select and confirm the menu item.

Select and confirm the menu item.

Follow the user guidance system from this point on- wards. Enter the required switch code (1... 4).

Press the On-hook key to end the process.

45