SIEMENS 5881 Broadband Internet Router

Chapter 5 Advanced Setup

User’s Guide

QoS

 

 

QoS

Quality of Service actively manages network resources to sustain service levels for priority applications. Mission-critical and real-time Internet applications demand a network that provides high bandwidth and low latency. Such applications cannot tolerate unpredictable degradations of network services. Therefore, network services must contain features that provide adequate assurance of sustained service levels. Some of the benefits associated with Quality of Service include:

Guaranteed available bandwidth and minimum delays to real-time Voice over IP traffic Dynamic allocations of bandwidth to non-critical applications

User control over network traffic levels, and potential cost-efficiencies Advanced differentiation of network services

Measurement and reporting of network service levels

Applications, such as video conference or IP telephony, must be able to communicate their service level requirements to an infrastructure that can consistently meet those requirements. To do this, QoS control mechanisms must be present in each network element. This router provides such QoS control mechanisms and can interpret the service requirements indicated by network applications, fully participating in any differentiated services architecture.

This router provides Quality of Service using two methods: Differentiated Services Framework (DiffServ) and Weighted Fair Queuing (WFQ).

Differentiated Services Framework

(DiffServ) is a facility to prioritize the requirements of each Class of Service (for example e-mail, streaming video, voice) according to defined policies. DiffServ is suited to Metropolitan Area Networks or private networks where control over the infrastructure is guaranteed, and differentiated services can be deployed end-to-end.

To employ DiffServ, each packet of data is tagged with a six-bit pattern known as the DiffServ CodePoint (DSCP), replacing the three IP precedence bits in the ToS byte of the IPv4 header. This tag determines the processing of each packet as a Pre-Hop Behavior (PHB) at each DiffServ node. Each DSCP is read and network resources are allocated to a packet according to the Class of Service defined in its associated policy.

When DiffServ is activated on your router, data packets are read and marked according to their DiffServ priority. The packets are then queued and processed according to the defined QoS policy.

Weighted Fair Queuing

(WFQ) is a flow-based queuing algorithm that performs two functions simultaneously:

It schedules priority traffic to the front of the queue to reduce response time.

It fairly distributes remaining bandwidth between remaining queues.

Consequently, WFQ ensures that queues are not starved for bandwidth and that traffic service levels are made more predictable.

Weighted Fair Queuing adapts automatically to changing network conditions and requires minimal configuration. WFQ is implemented on the router and applies to network traffic passing through it. Unlike DiffServ, external nodes have no affect on QoS through Weighted Fair Queuing.

Weighted Fair Queuing provides a means of ensuring that high priority or mission-critical applications receive adequate levels of bandwidth. This is accomplished by controlling two key factors in QoS policies. Manipulation of these two factors determines the quality of service to each application.

SIEMENS

37

Page 43
Image 43
Siemens 5881 manual QoS, Differentiated Services Framework, Weighted Fair Queuing