Program the multiple subscriber numbers MSNs, Ntba | Siemens A30853

27.11.98

kap01.fm5

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Putting the telephone into operation

Note that the NTBA must be connected to the power grid.

The Profiset 30isdn takes the necessary power from this

NTBA.

In order to avoid unauthorized unplugging of the telephone connecting cord from the telephone socket, the plug is protected. Use a small screwdriver or the like to unplug the connector.

Step 3: Entitle the device to operate in restricted powering conditions

The restricted powering switch is located on the under- side of the device. The recessed sliding switch can be moved with a screwdriver.

If the switch points to the symbol A , your telephone is entitled to operate in restricted powering conditions that means that the important telephone functions can still be used.

If you connect more than one unit to your ISDN connection, only one unit can be operated during restricted powering. Mark this unit accordingly!

Step 4: Program the multiple subscriber numbers (MSNs)

Display after connecting the telephone

a

We recommend that you enter the MSNs when first putting the telephone into operation, because only then you can use all the functions of your telephone. The MSNs (Multiple Subscriber Numbers) are the call numbers you were assigned for your ISDN connection.

These numbers are entered as follows:

00.00.00 00:00

Handset is on-hook.

S01 T Enter “1“ for MSN 1

TEnter the MSN

P

01 _

P

01 1 _

P

33758_

The input of the first MSN is completed. Repeat these

Ssteps for the second and third MSN.

4

Image 12

Siemens A30853 operating instructions Program the multiple subscriber numbers MSNs, Ntba

Contents

Profiset 30isdn Profiset 30isdn Profiset 30isdnYour guide to this manual Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Safety precautions and approval Safety precautionsLocation of the telephone Profiset 30isdn Approval and conformity Contents Contents Symbols used in these operating instructions Putting the telephone into operationPutting the telephone into operation Isdn connecting cord Handset cord coiled Telephone connecting cord Putting the telephone into operation Connect the telephoneHandset cord coiled Program the multiple subscriber numbers MSNs Ntba Setting the national variants PBX operation only Program the trunk code Putting the telephone into operation Try out the telephone Calling another partyTaking a call Symbols Digit display line Display Idle modeDisplay-driven telephone operation Display-driven telephone operation Connected mode 030234577 001.20 045672343 Outgoing and incoming calls Outgoing and incoming callsCalling users On-hook dialling Outgoing and incoming calls Number redial automatic dialling Is displayed Outgoing and incoming calls Accepting a call Rejecting a call DisconnectCall forwarding Deactivating the call signal Do not disturb Outgoing and incoming calls Call waitingAccepting call waiting Rejecting call waiting Outgoing and incoming calls Call list Retrieving entries from the call listDialling a number from the call list Storing a number from the call list Callback Deleting the call listInitiating a callback Ending a call disconnecting Accepting a callbackClearing a callback Switching to mute consultation in the room Convenient and secure telephone communicationConvenient and secure telephone communication Activating/deactivating open listening Convenient and secure telephone communication Parking a call Resuming a parked call 27.11.98 Kap01.fm5 Keypad signalling Dtmf Switching between two calling parties toggling Calls involving two or more partiesCalls involving two or more parties Calling the second party consultation Disconnecting one party Three-party conference Ending a conference by disconnecting a party Calls involving two or more parties Ending a conferenceEnding a conference and toggling between parties Exiting from a conference Programming keys on the telephone Programming keys on the telephoneProgramming the destination dialling keys Programming the speed dialling keys Programming direct station selection babyphone Quick reference for available telephone settings Quick reference for available telephone settingsTelephone settings Description Programming the telephone settings Programming the telephone settingsPassword Programming the telephone settings Ringer volume Ringer melody S06 T 0 or Following settings are possible Call processing type Multiple Subscriber Numbers MSN Programming the telephone settings National variants 27.11.98 Kap01.fm5 Date/time Call number for call forwarding unconditional Enter the call number for call forwarding Save the setting Tariff unit factor Call is deactivated Clearing the summation meter S14 T Enabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings status Displaying the software version Important information for installation and operation Important information for installation and operationMaintenance Removing and inserting the labelling cards Default settings Technical data Third party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossary Isdn glossary Isdn glossary Quick reference guide Quick reference guideToggling d è R è R Quick reference for available telephone settings Index Index Technical data 27.11.98 Back.fm5 Siemens Aktiengesellschaft