27.11.98

kap01.fm5

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Programming keys on the telephone

Programming keys on the telephone

Programming the destination dialling keys

a

S10 T z

T

Each Destination dialling key (at the top, left to the label- ling card page III) can be programmed with a frequently used call number (up to 24 digits)

If a Destination dialling key has already been assigned, the call number is displayed by pressing this key.

You can cancel a programming procedure without making any changes by pressing the Disconnect key.

Handset is on-hook.

Start the programming procedure.

Enter the password if necessary.

Press the Destination dialling key.

Enter the call number.

If you press the Number redial key, you can also program the second Destination dialling key without having to exit the programming procedure.

Press the Number redial key in order to be able to

Wprogram the second Destination dialling key with a call number.

zPress the second Destination dialling key.

TEnter the call number.

SDestination dialling numbers are stored.

You can use the labelling cards supplied to note the names of the users next to the associated keys, for example (page 41).

Programming the speed dialling keys

You can also program the digit keys 0 to 9 with frequently used call numbers (up to 24 digits).

If a digit key has already been assigned with a speed dial- ling number, the call number is displayed by pressing first the speed dialling key and then the digit key.

25

Page 33
Image 33
Siemens A30853 operating instructions Programming keys on the telephone, Programming the destination dialling keys