27.11.98 | kap01.fm5 | Profiset 30isdn engl.: |
Convenient and secure telephone communication
Parking a call
d S04
S and b
Resuming a parked call
a
S04
S and c
You can temporarily park a call in order to
●reactivate it at a later stage
●resume it at another telephone
●unplug your telephone from one socket and plug it into another
The telephone must not be parked for more than three minutes, as otherwise the call will be disconnected.
A call is in progress.
Press the Programming key and enter the code “04“ for “Parking a call“.
The stored connection code is indicated on the display.
The connection code is a number under which the call can be parked and later resumed.
If the call is to be parked under a different connection code, the connection code must have been changed beforehand (➔ page 34).
Press the Programming key again and replace the hand- set.
The call is now parked for a maximum period of 3 minutes.
A call can only be parked, if is connected to the same S0 bus.
You can resume a parked call from the same telephone or from a different telephone (it must be connected to the same S0 bus).
Prerequisite: A call is parked and you are not conducting a call.
Handset is
Press the Programming key and enter the code “04“ for “Parking/resuming a call“.
The connection code is indicated on the display. If the call was parked under a different connection code, change the connection code beforehand (➔ page 34).
Press the Programming key again and lift the handset. You are now
You can cancel a programming procedure without making any changes by pressing the Disconnect key h !
18
