Call is deactivated | Siemens A30853 guide

0 or 1

27.11.98

kap01.fm5

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Programming the telephone settings

TEnter the password if necessary.

Press key 0 or 1.

SSave the setting.

Activating/deactivating the display of charge/call time of the last outgoing call

a

S17

T

0or 1

S

The charge and call time for the last outgoing call (if it is activated) are displayed for approx. 10 seconds after the handset has been lifted and replaced.

Enter 0 or 1 to deactivate or activate the display of charge:

●	“0“	Display of charge /call time of the last outgoing
		call is deactivated
●	“1“	Display of charge /call time of the last outgoing
		call is activated

In the as-supplied condition, the display of charge/call time of th last outgoing call is activated.

Handset is on-hook.

Start the programming procedure.

Enter the password if necessary.

Press key 0 or 1.

Save the setting.

There may be differences between the device’s meter and the charge meter of the switching centre. The charge meter of the network opera- tor is definitive for the telephone bill.

36

Image 44

Siemens A30853 operating instructions Call is deactivated

Contents

Profiset 30isdn Your guide to this manual Profiset 30isdnProfiset 30isdn Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Location of the telephone Safety precautions and approvalSafety precautions Profiset 30isdn Approval and conformity Contents Contents Putting the telephone into operation Symbols used in these operating instructionsPutting the telephone into operation Isdn connecting cord Handset cord coiled Handset cord coiled Telephone connecting cordPutting the telephone into operation Connect the telephone Program the multiple subscriber numbers MSNs Ntba Setting the national variants PBX operation only Program the trunk code Taking a call Putting the telephone into operation Try out the telephoneCalling another party Symbols Digit display line Display Idle modeDisplay-driven telephone operation Display-driven telephone operation Connected mode 030234577 001.20 045672343 Calling users On-hook dialling Outgoing and incoming callsOutgoing and incoming calls Outgoing and incoming calls Number redial automatic dialling Is displayed Call forwarding Outgoing and incoming calls Accepting a callRejecting a call Disconnect Deactivating the call signal Do not disturb Outgoing and incoming calls Call waitingAccepting call waiting Rejecting call waiting Outgoing and incoming calls Call list Retrieving entries from the call listDialling a number from the call list Storing a number from the call list Initiating a callback CallbackDeleting the call list Clearing a callback Ending a call disconnectingAccepting a callback Switching to mute consultation in the room Convenient and secure telephone communicationConvenient and secure telephone communication Activating/deactivating open listening Convenient and secure telephone communication Parking a call Resuming a parked call 27.11.98 Kap01.fm5 Keypad signalling Dtmf Switching between two calling parties toggling Calls involving two or more partiesCalls involving two or more parties Calling the second party consultation Disconnecting one party Three-party conference Ending a conference by disconnecting a party Calls involving two or more parties Ending a conferenceEnding a conference and toggling between parties Exiting from a conference Programming keys on the telephone Programming keys on the telephoneProgramming the destination dialling keys Programming the speed dialling keys Programming direct station selection babyphone Quick reference for available telephone settings Quick reference for available telephone settingsTelephone settings Description Password Programming the telephone settingsProgramming the telephone settings Programming the telephone settings Ringer volume Ringer melody S06 T 0 or Following settings are possible Call processing type Multiple Subscriber Numbers MSN Programming the telephone settings National variants 27.11.98 Kap01.fm5 Date/time Call number for call forwarding unconditional Enter the call number for call forwarding Save the setting Tariff unit factor Call is deactivated Clearing the summation meter S14 T Enabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings status Displaying the software version Important information for installation and operation Important information for installation and operationMaintenance Removing and inserting the labelling cards Default settings Technical data Third party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossary Isdn glossary Isdn glossary Toggling d è R è R Quick reference guideQuick reference guide Quick reference for available telephone settings Index Index Technical data 27.11.98 Back.fm5 Siemens Aktiengesellschaft