SMS (Text Messages)

Adding the telephone number of a text message to the directory

You can add the telephone number to your directory.

Precondition: You have opened the incoming message list and selected a message

[MENU]

 

 

Press the display key to open the menu.

[__________] [Copy to Directory

]

Select the menu item and confirm.

 

 

[OK ]

 

[OK]

 

 

Confirm the telephone number.

 

 

 

Enter a name (up to 16 characters) (for inputting text

 

 

 

see page 74).

[MENU]

 

 

Press the display key to open the menu.

[Save Entry

 

] [OK ]

Confirm.

 

 

 

Long press (back to idle status).

i

The number must be stored in the directory together with its area code

(prefix) so that it can also be used for sending text messages.

Text messages to PABX's

You can only receive a text message when the Calling Line Identification is forwarded to the extension of the PABX (CLIP).

The CLIP of the number of the SMS centre is evaluated in the Gigaset (telephone).

If your phone is connected to a PABX, you may have to prefix the number of the SMS centre with the access code (this depends on your PABX). If in doubt, you can test your PABX by sending a text message to your own number and putting the access code before the number of the SMS centre. If you do not receive the message, send another one, this time without the access code.

When you send messages, your sender number may be sent without your extension number. The recipient cannot reply to you directly in this case.

Text messages can only be sent and received through ISDN exchanges with the MSN number assigned to your base.

37