Siemens CF62 Calling, Redial, End call, Set volume, If the number is busy, Dialling with number keys

Enter number (always with area code/interna- tional dialling code).

§Clear§ A short press clears the last digit, a long press clears the entire phone number.

Press the Call key. The dis- played phone number is dialled.

Calling 15

Calling

Dialling with number keys

Open the clamshell to gain access to the keypad.

The phone must be switched on

(standby mode).

J

A

End call

BPress the End key briefly. Press this key even if the person on the other end of the line has hung up first.

Set volume

GUse the top of the naviga- tion key to start adjusting the volume. Then press top/bottom to adjust the volume as required (only possible during a conversation).

If a Car Kit is used, its volume setting will not affect the usual setting on the phone.

Redial

To redial numbers that were dialled

APress the Call key once.previously:

I	Pick out the required
	phone number from the
A	list, then to dial ...
	Press ...

If the number is busy

Auto. redial

§Auto dial§ Press. The phone number is automatically dialled ten times at increasing time intervals.

Call back b

§Call back§ Press. Your phone rings when the busy number is free.

Reminder

§Prompt§ Press. A beep reminds you to redial the displayed phone number after

15 minutes.