Phone overview | 5 |
1Loudspeaker
2Colour Display
3Soft keys
The current functions of these keys are shown
in the bottom line of the display as §Text§/symbol (e.g., Q).
4Input keys
5*Ringtone
•Hold down in standby mode: Switch all audible signals on/off (except alarm).
•Hold down on incoming call: Switch off ring tone for this call only.
6Plug socket
For charger, headset, camera etc.
7Dynamic light
Seven LEDs indicate visually different events and functions, as well as the current phone status, e.g.network searching, battery low, etc. (set, page 42).
You can determine the visual signal (LEDs) on the phone for certain functions and events. The LEDs then flash in different rhythms depending on the current function.
_ª g
Service provider
01.05.2004 10:10 NewMMS
Menu