Siemens CF62 Dynamic light

42 Setup

Illumination

The illumination for the colour display and the 2nd display can each be set independently.

Colour display

Set display light brighter/darker. The darker the setting the longer the standby time.

2nd display

Switch the display light on or off.

Contrast

Set colour display contrast.

Dynamic light

§Menu§KmKDynamic light KSelect function.

The dynamic light consists of 7 LEDs at the edge of the keyboard (page 5).

It is used to indicate visually different events and functions, as well as the current phone status (e.g.network searching, battery low, etc.).

You can determine the visual signal (LEDs) on the phone for certain functions and events. The LEDs then flash in different rhythms depending on the current function.

You can also create your own flash rhythms.

Show light effects

This enables you to switch the visual signal on and off centrally for all functions and events.

Play demo

All flash rhythms are displayed in sequence. End with §Cancel§. Show next flash rhythm with §Next§.

Brightness

This enables you to set the brightness for the visual signal.