Manuals / Siemens / Computer Equipment / Network Card

Siemens eWON4002 manual Recommendations for the GSM/GPRS antenna, SIM-card insertion

Models: eWON4002

1 38

Download 38 pages 8.58 Kb

Page 15

Image 15

eWON4002™

Installation Guide

ver 2 . 04

5.3.1 Recommendations for the GSM/GPRS antenna

A dual band GSM/GPRS antenna is available as accessory (ref EW40902). Here are our recommendations for GSM antenna:

	Specification	Value

	Description	GSM/DCS gain GSM antenna
	Description	Dual band 900/1800 MHz
		Dual band 900/1800 MHz

	Gain dB	+2 dB @ 900 MHz
	Gain dB	+0 dB @ 1800 MHz
		+0 dB @ 1800 MHz

	Max antenna cable length	5m
	(recommended)	5m
	(recommended)
	Antenna cable termination required	SMA-M
	Antenna cable termination required	Warning: adapter SMA-M/FME-M to be inserted if antenna has
	to be compatible with the eWON®	Warning: adapter SMA-M/FME-M to be inserted if antenna has
	to be compatible with the eWON®	FME-F termination (available as spare)
		FME-F termination (available as spare)

	Table 8: Recommendations for GSM/GPRS antenna

Eject SIM card	SIM card drawer	SMA antenna
Eject SIM card		connector’s place
button		connector’s place
button
	Figure 8: SIM-card insertion

page 12 of 35

Page 15

Image 15

Siemens eWON4002 manual Recommendations for the GSM/GPRS antenna, SIM-card insertion

Contents

Installation Guide EWON4002 Installation Guide Table Of Contents IP parameters configuration Technical support Ethernet Gateway General specification of the hardware platformProduct description IntroductionPart Numbers and internal options RAS Modem & PIRDatalogger Typical applicationsType/Description Part Number External accessoriesCc= Communication Xy = OptionsStructure of the eWON technical documentation Level Title ContentsHousing Housing and markingsSerial number Required power supplyMarkings Applicable directives, standards and complianceMechanical outline Equipment information and versionsSpring Bottom Slider Mounting and environmental conditionsAuto fuse Preparing the installationSpecifications for external power supply selection Specification ValueFront panel control LEDs Ethernet Port Communication interfaces and I/OsEmbedded Pstn Modem Embedded GSM/GPRS ModemSIM-card insertion Recommendations for the GSM/GPRS antennaSerial port Dip switch Serial portsSerial port #1 Serial port #2 Positions ModeSerial port #3 Serial port 3 connector and dip switchDigital Inputs Open collector Digital Output Digital OutputsConfigurable standard Analog Inputs AI1 AI4 Analog InputsRelays Resistive Temperature Detector Inputs Under Windows 98, NT Communicating with the eWONBy Ethernet By phone line or GSMUnder Windows XP EWONCFG utility and IP parameter window IP parameters configurationTechnical support ResetsUser Reset Factory ResetPower supply Connector Appendix Pinouts and connections Power SupplyCrossed Cable Ethernet ConnectorEthernet Direct connectionHub/Router Straight Cable Connection over hub/routerRJ 45 connector/cabling RJ45 connectorDigital Input/Output connector pinout Pin Description 1 DI / do connectorDigital Input/Output Connector Digital Input/Output mating female connector includedAnalog Input Analog Input ConnectorAnalog Input mating female connector included Analog Input connector pinout Pin DescriptionRelays output Relay ConnectorRelays Output mating female connector included Relays output connector pinout Pin DescriptionDigital Input Digital inputTop face Back face Front FaceSerial ports connectors Female DB9 with 4/40 blocking screws Pin RS232 Pinout serial ports 1 and 3 according to modePinout serial port Pin RS232 RS485 RS422DA is connected to B- and DB is connected to A+ MiniDIN PIN Schneider Signal EWON Signal Name EWON SUBDB9Connector Unitelway/Modbus serial cablePstn phone line connector Pstn phone line ConnectorPstn phone line mating male connector not included

eWON4002™

5.3.1 Recommendations for the GSM/GPRS antenna

Specification

Figure 8: SIM-card insertion