eWON4002™
Installation Guide
ver 2 . 04
9.2 Ethernet
Ethernet
connector
The eWON® can be accessed by a 10/100BaseTX Ethernet connection. This connection can be made with two different cables (straight or crossed). These cables have 8 copper conductors and are known as UTP Class 5 with RJ45 terminations at both ends. These cables are availbale as spare parts (see External accessories on page 3).
The type of cable (straight or crossed) depends on the equipment the eWON® will be connected to. The most current cases are the direct connection with a PC (crossed) and the connection through a hub/ router (straight).
9.2.1 Direct connection
If the eWON® is connected directly to a PC, then use the crossed cable:
Crossed
cable
page 25 of 35
