Siemens eWON4002 manual Communicating with the eWON, By Ethernet, By phone line or GSM

Models: eWON4002

1 38
Download 38 pages 8.58 Kb
Page 23
Image 23

eWON4002™

Installation Guide

ver 2 . 04

6 Communicating with the eWON®

6.1 By Ethernet

1 ) Plug one of the Ethernet cables [see appendix (Direct connection on page 25 and Connection over hub/ router on page 26)] between your eWON® and either your PC (crossed cable) or onto your network (straight cable).

2 ) Configure your Internet browser connection, in order not to use a proxy server (please have a look at your browser help file)..

With a direct connection between PC and eWON®, TCP/IP settings have to be with fixed IP addresses and hence cannot have DHCP enabled (automatic IP address allocation by host).

3 ) Launch your Internet Browser on your PC.

4 ) Type the eWON® TCP/IP address on the address edit control of your Internet Browser (10.0.0.53 is the factory default by Ethernet).

5 ) The eWON® returns its login web page. If not -404 Error, server not found-, redo the procedure from the beginning and check whether you did not forget anything.

6 ) Introduce the default login parameters that are:

User Name: <adm>

Password: <adm>

7 ) You can now access the different web pages of the eWON® and, among others, configure your connection parameters by selecting the following options in the menu of the home page:

To configure the Ethernet IP address:

<Configuration>, <System Setup>, <Communication>, <Ethernet>

To configure the PPP IP address:

<Configuration>, <System Setup>, <Communication>, <DialUp (PPP)>

6.2 By phone line or GSM

6.2.1 Under Windows 98, NT and 2000

1) Open the root folder Dial-up Networking.

2) Click on the icon Make new connection.

3) Give a name to this connection.

4) Select a local modem from the list and click Next.

5) Introduce the phone number and the login <adm> and password <adm> of your eWON® (or the login/ password you have created) and click Next.

6) Click Finish.

7) A new icon has been created in the Dialup Networking folder.

8) Open the connection wizard by double clicking on this icon and introduce the login/password for PPP authentication which are the same than those for the eWON® Web site access (<adm> / <adm> by default). Make the connection and wait until the modems are synchronized (MDM led on the front panel is active) and that your authentication login has been accepted.

9) Launch your Internet Browser on your PC.

10) Types the eWON® TCP/IP address on the address edit control of your Internet Browser (202.0.0.240 is the eWON® but you could have modified, in this case use the new address).

11) The eWON® should display its login web page. If not -404 Error, server not found-, redo the procedure from the beginning and check whether you did not forget anything.

12) Unless you have changed them, introduce the default Web site access login parameters that are:

User Name: <adm>

Password: <adm>

13) You can now access the different Web pages of the eWON® and, among others, configure your connection parameters by selecting the following options in the menu of the home page:

page 20 of 35

Page 23
Image 23
Siemens eWON4002 manual Communicating with the eWON, By Ethernet, By phone line or GSM, Under Windows 98, NT