Siemens Gigaset 4210 user manual Attaching the Belt Clip, Turning Handset On/Off

Gigaset 4015 Comfort, USA, A31008-G4015-B102-1- vorberei.fm 24.08.0

Setting Up the Telephone

Leave the handset in the base station for about 12–14 hours the first time the batteries are charged. The charging status symbol flashes on the handset, indicating that the batteries are being charged:

K Batteries empty (symbol	I Batteries 2/3 charged
flashes)
J Batteries 1/3 charged	H Batteries fully charged

●Once the initial charging operation is completed, you can re- place your handset into the base station or charger after each call. Charging is controlled electronically. This ensures opti- mum charging and prolongs battery life.

●The batteries heat up during charging. This is normal and not dangerous.

●The battery charging status is correctly displayed only after uninterrupted charging/discharging. You should therefore avo- id opening the battery compartment unnecessarily.

Attaching the Belt Clip

Push the belt clip onto the back of the handset until the tabs click into place.

Turning Handset On/Off

￿To turn handset on/off, hold down the End key – you will hear a con- firmation beep.

The handset is turned on as soon as you insert the batteries and place the handset in the base station.

5