Siemens Gigaset 4210 user manual Operating the Handset, Inserting the Batteries

Gigaset 4015 Comfort, USA, A31008-G4015-B102-1-7619 vorberei.fm 24.08.01

Setting Up the Telephone

￿

G

Operating the Handset

The display is protected by a plastic film.

Remove the protective plastic film!

Inserting the Batteries

+ –

– +

●Insert the batteries, as shown above.

●Place cover and push gently upward until it clicks into place (the unit is shipped with the battery cover off).

●To open, press the grooved area on the cover and slide back.

●Use only “AA” rechargeable NiCd or NiMH batteries. Do not use Alkaline, Lithium or non-rechargeable batteries.

●Never use non-Siemens charging units as these can damage the batteries.

Placing Handset into the Base Station and Charging the Batteries

IMPORTANT! Before using your handset, you must register it first.

Turn the handset off by holding down the END key then place it in the base station with the display facing upward toward you. After about one minute, the handset's internal number will appear on the display (for example“INT 1”). Successful registration is signaled by a confir- mation beep (crescendo tone sequence).

For information on how to register additional handsets (bought separately), see page 38.

4