Gigaset 4015 Comfort, USA, A31008-G4015-B102-1-7619

mobilt_an.fm

24.08.01

Handset Operation

Press keys:

Manual Registration

If automatic registration does not work properly, or you wish to register your handset to another base station you may manually register a handset. A handset can only be registered to one Gigaset base station at a time.

Step 1: On the Handset

0(18 Press Menu.

￿]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]H/Set Settings ￿ Scroll to H/Set Settings and press OK.

￿]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]Reg. Handset ￿ Scroll to Reg. Handset and press OK.

￿￿￿ Select the base station ( Base 1 is recommended un- less you are registering your handset to an additional base).

)￿￿ Enter the PIN (factory setting: 0000).

Step 2: Underside of the base station

Hold down the Page/Registration key on the underside of the base station for approximately 10 seconds until a signal tone is heard at the base station.

When the handset has been successfully registered, the intercom number is shown (for example, “INT1”).

If all internal handset numbers are assigned, the inter- com number 4 is reassigned. The handset that has been registered under number 4 will be deregistered.

39

Page 45
Image 45
Siemens Gigaset 4210 user manual Manual Registration, On the Handset, Underside of the base station