Gigaset 4015 Comfort, USA, | mobilt_an.fm | 24.08.01 |
Handset Operation
Press keys:
''. . . '
1 | 2 | 4 |
G
Handset Operation
You can register and operate up to four handsets at your Gigaset 4210 base station.
Registering Handsets
In order for a handset to work it must be registered to your base. Handsets can either be registered automa- tically or manually. The handset that comes with your Gigaset 4210 needs to be first registered to the base in order for it to work.
Automatic Registration
To automatically register a handset:
Turn the handset off by holding down the End key
Place the handset in the base station with the display facing toward you.
The handset will turn on once it is placed into the base. After approximately one minute, the handset's inter- com number is shown (for example, “INT1”).
The handset is now registered and ready for use.
Up to three additional handsets may be added to the system for a total of four handsets.
The next unassigned intercom number (2 through 4) is automatically assigned to each handset as it is regis- tered. If all numbers are assigned, the intercom num- ber 4 is automatically reassigned.
It is possible to assign a different intercom number (see page 85) or a different intercom name (see page 85) to a handset.
38
