Siemens L-850D/E F-Range Style 2 Inset Lights manual Label Toe-in Installation

L-850D/E F-Range Style 2 Inset Lights General Information and Requirements

Equipment data, continued

Toe-in coding For some applications, the inset lights are delivered with built-in toe-in. Refer to page 30 and following for detailed information.

According to this toe-in, those lights are to be installed to the left or to the right of the Runway/ Approach center line. The built-in toe-in is referenced with labels (black letters on yellow background):

Label	Toe-in	Installation
	right	to the left of the center line when looking in the
C.L
		direction of the (main) beam
	left	to the right of the center line when looking in the
C.L
		direction of the (main) beam
No label	no	on the center line

NB: the arrow points towards the R/ W centre line.

Equipment required for installation and maintenance

Beyond the light itself, some equipment is required for installation and maintenance.

This equipment is not supplied with the light but can be purchased from Siemens Airfield Solutions.

It is listed on page 11.

 2002 Siemens Airfield Solutions, Incorporated	96A0266D	8
All rights reserved	Issued 2/02